PS
Motion Amplification - Dealing with Thermal Distortion
For the MA camera users, vibration of the high temperature object is difficult to analyze because the hot surface causes moving air,...
top of page
Search
RC
Sep 20, 20211 min read
Air duct vibration analysis with motion amplification and fatigue assessment
This is a case study of vibration measurement and analysis on air duct of primary air fan installed at a new thermal power plant....
238 views0 comments
PS
Jul 22, 20211 min read
Power of HDR Filtering
The High Density Recording or HDR filtering feature of the RDI's motion amplification software platform is a feature that help user to...
69 views0 comments
PS
Jun 19, 20201 min read
Case Study: Fixing Coupling Damage with Motion Amplification Camera
Motion Amplification camera was used to measure and analyze vibration data of the motor installed in a gas processing plant. Root cause...
167 views0 comments
Pisut Lertsongkram
Mar 26, 20205 min read
Fighting Outbreaks with Remote Monitoring Solutions
With coronavirus (COVID-19) outbreaks, we need to limit traveling to prevent further spreading and let the virus cured. However, we are...
106 views0 comments
RC
Feb 18, 20201 min read
CBM Day 2020 Conference – “Creative Talents”
There was great and pleasure to be a part of this event last week. This is the biggest CBM conference in the country bringing suppliers,...
86 views0 comments
PS
Oct 28, 20192 min read
Bump Test with Motion Amplification Camera
In general we perform bump/impact test to find natural frequency as rough test to prove if resonance problem exists. But however if we...
355 views0 comments
RC
Oct 24, 20191 min read
Master Vibration Analyst Cat. IV Course in Korea, October 2019
There was great and pleasure working with you all. I wish you good luck for the exam and be certified soon. Thank you for joyful...
105 views0 comments
RC
Jul 9, 20191 min read
Shared & learn session, CBM Day on Tour 2019 @ Korat, Thailand
Machinosis participated and presented at CBM Day on Tour 2019 at Korat, Thailand. This is the biggest CBM conference in the country. We...
76 views0 comments
RC
Jul 2, 20191 min read
Vibration Analyst CAT. IV Classroom, 24-28 June 2019, Pattaya, Thailand
We have completed another Cat IV classroom session last week in Pattaya for participants from various countries around the region below....
137 views0 comments
RC
May 12, 20192 min read
Shared & Learn session at VANZ Conference 2019, Queenstown, NZ
We attended VANZ Conference 2019 in Queenstown, NZ last week and presented two papers below. It was great and pleasure to be there again...
69 views0 comments
RC
Mar 25, 20192 min read
Real-time torsional vibration measurement and analysis
Rotating and reciprocating machines are prone to some degrees of torsional vibration, but however its presence is generally unaware since...
497 views0 comments
RC
Feb 9, 20191 min read
CBM Day 2019 Conference, Chonburi Thailand
Machinosis participated CBM Day 2019 with exhibiting booth to show our products and services capability during 7-8 Feb. This is great...
112 views0 comments
RC
Jan 26, 20191 min read
Vibration analyst CAT IV course by Machinosis
ISO Standard 18436-2 Category IV Classroom Course & (Optional) Exam, 24-28 June 2019 Join Machinosis to learn and enjoy yourself in...
137 views0 comments
RC
Jan 10, 20191 min read
We moved!
We are excited to announce that our team has moved to a new location. From 9 January 2019 onward, the address below will be used in all...
122 views0 comments
RC
Nov 26, 20181 min read
The impossible is now possible : measuring pipe vibration inside the furnace
High vibration was observed at pipes installed inside the furnace in a refinery and this results in a concern of fatigue failure. This...
140 views0 comments
PS
Nov 15, 20181 min read
Attended the 20th Korea Rotating Machinery Symposium (KRMS) Conference
We attended 20th Korea Rotating Machinery Symposium in Korea, during 14-16 November 2018 and would like to share some pictures for our frien
139 views0 comments
RC
Nov 9, 20181 min read
Iris M Motion Amplification Certified Course in Thailand
We just completed our first 2 days Iris M Motion Amplification certified course in Thailand during 6-7 Nov 2018. Thanks to JT Chung for...
79 views0 comments
RC
Nov 1, 20181 min read
Participating Openhouse 2018: Tools and new innovation exhibition
Machinosis participates Openhouse 2018: Tools and new innovation exhibition during 31 Oct to 01 Nov at EGAT (Electricity Generating...
36 views0 comments
RC
Oct 1, 20181 min read
Master vibration analyst Cat. IV course by Machinosis
We just finished our first Vibration Analyst Cat. IV course last month in Rayong, Thailand. It was great and pleasure to support our...
156 views0 comments
bottom of page