Technical training courses by Machinosis before the end of this year
We will finish this year with three training courses below before we could celebrate new year and take some breaks for vacation. We got...
top of page
Search
RC
Sep 20, 20221 min read
Practical operating deflection shape and modal analysis course, 17-19 Aug 2022
I am very delighted that we could make this last month for around 20 students in the class. This project was committed since last year...
55 views0 comments
RC
Jul 12, 20221 min read
CBM Day 7-8 July 2022 in Thailand
We were participating CBM Day 2022 in Chonburi, Thailand as an exhibitor during 7-8 July. Our highlighted products this year are...
70 views0 comments
RC
May 24, 20221 min read
Vibration Analyst CAT. IV Classroom in Pattaya, Thailand
The country is fully re-opened now after pandemic so we planned to arrange this session again in Q3 this year. We had a few participants...
75 views0 comments
RC
May 23, 20221 min read
Machinery diagnostics training courses by Machinosis in 2022
We regularly conduct the following courses for local as well as international customers. We believe the contents of these three main...
355 views0 comments
RC
Jan 24, 20221 min read
Pre and post outage vibration data collection and analysis
This is mandatory for power generation and petrochemical plants overhaul as vibration data must be collected at before and after overhaul...
92 views0 comments
RC
Jan 13, 20222 min read
Commissioning support and troubleshooting high vibration problem on a new steam turbine
This is our last job of year 2021 working on a new steam turbine – generator set during commissioning. Unit installation was completed...
111 views0 comments
RC
Feb 18, 20201 min read
CBM Day 2020 Conference – “Creative Talents”
There was great and pleasure to be a part of this event last week. This is the biggest CBM conference in the country bringing suppliers,...
86 views0 comments
RC
Oct 24, 20191 min read
Master Vibration Analyst Cat. IV Course in Korea, October 2019
There was great and pleasure working with you all. I wish you good luck for the exam and be certified soon. Thank you for joyful...
105 views0 comments
RC
Jul 9, 20191 min read
Shared & learn session, CBM Day on Tour 2019 @ Korat, Thailand
Machinosis participated and presented at CBM Day on Tour 2019 at Korat, Thailand. This is the biggest CBM conference in the country. We...
76 views0 comments
RC
Jul 2, 20191 min read
Vibration Analyst CAT. IV Classroom, 24-28 June 2019, Pattaya, Thailand
We have completed another Cat IV classroom session last week in Pattaya for participants from various countries around the region below....
137 views0 comments
RC
May 12, 20192 min read
Shared & Learn session at VANZ Conference 2019, Queenstown, NZ
We attended VANZ Conference 2019 in Queenstown, NZ last week and presented two papers below. It was great and pleasure to be there again...
69 views0 comments
RC
Feb 9, 20191 min read
CBM Day 2019 Conference, Chonburi Thailand
Machinosis participated CBM Day 2019 with exhibiting booth to show our products and services capability during 7-8 Feb. This is great...
112 views0 comments
RC
Jan 10, 20191 min read
We moved!
We are excited to announce that our team has moved to a new location. From 9 January 2019 onward, the address below will be used in all...
122 views0 comments
PS
Nov 15, 20181 min read
Attended the 20th Korea Rotating Machinery Symposium (KRMS) Conference
We attended 20th Korea Rotating Machinery Symposium in Korea, during 14-16 November 2018 and would like to share some pictures for our frien
139 views0 comments
RC
Nov 9, 20181 min read
Iris M Motion Amplification Certified Course in Thailand
We just completed our first 2 days Iris M Motion Amplification certified course in Thailand during 6-7 Nov 2018. Thanks to JT Chung for...
79 views0 comments
RC
Nov 1, 20181 min read
Participating Openhouse 2018: Tools and new innovation exhibition
Machinosis participates Openhouse 2018: Tools and new innovation exhibition during 31 Oct to 01 Nov at EGAT (Electricity Generating...
36 views0 comments
RC
Oct 1, 20181 min read
Master vibration analyst Cat. IV course by Machinosis
We just finished our first Vibration Analyst Cat. IV course last month in Rayong, Thailand. It was great and pleasure to support our...
156 views0 comments
RC
Jun 18, 20183 min read
ASUG 2018 Conference in San Diego CA
Machinosis will be participating ASUG 2018 conference in San Diego, CA this year. Case study of different applications will be presented,...
62 views0 comments
RC
Apr 4, 20181 min read
We got many good shots today!
We started inducing and demonstrating motion amplification (MA) to our customers in the region with many good feedbacks and comments so...
99 views0 comments
bottom of page